User guide

DEFINITY Performance Management User Guide, Release 2.0, 585-229-808
7 Administer Reports
Define Data Fields
Issue 1
November 1998
Page 129
Note: Make sure that the data type you select here is also the data type that
you are collecting data on as described in
Chapter 6, "Specify
Collection Parameters" . The data selected here is also the data
available when you set up the format in the
Send Output tab. The data
can also be one of the types that you have already collected data on.
Result: The list of data fields in the left part of the pane changes according to
the report type selected.
3 In the lower left part of the pane, put a checkmark next to each data field you
want to report on.
• To select all data fields, click Select All.
• To clear all data fields so that none are selected, click Clear All.
You must select at least one data field. The data fields selected here will
be the columns in the report. A report normally includes all of the key
fields that identify the data, including DEFINITY name, date, time, and
applicable ID, such as trunk group ID.
4 In the right box, select how traffic intensity (for example, trunk group usage or
attendant talk time) should be measured by clicking in either the Show traffic
in CCS field or the Show traffic in Erlangs field.
Note: CCS = hundred call-seconds; one Erlang = 36 CCS.
5 Click Save to save the settings.
6 Do one of the following:
• To run the report immediately using the system defaults, click
Run Now.