Instruction manual

DEFINITY® Business Communications System and GuestWorks® Issue 6
Overview
555-231-208
Issue 1
April 2000
System Management Solutions
14-12Call Detail Recording
14
Chapter 10, ‘‘Voice Messaging Solutions.’’) While offering many of the same
features as the Call Accounting System for Windows (described in the previous
section), the system also serves to help integrate your I
NTUITY Lodging
applications.
Call Detail Recording Unit/SE
The Call Detail Recording Unit/SE can be used when call detail record storage is
more than 7000 records.
NOTE:
Some features and solutions are unavailable in some countries. Please
contact your local account manager or authorized Lucent Technologies
representative for further information about which features and solutions are
available to you.
The Call Detail Recording Unit/SE is a special-purpose processor containing a
built-in modem and permanently-installed Call Detail Recording Unit software. It is
a local Call Detail Recording storage device that collects, optionally filters, and
stores Call Detail Recordings from a variety of systems, including the switch.
Upon request from a Lucent Technologies polling system, the Call Detail
Recording Unit/SE transmits all Call Detail Recordings received since the last poll.
The same Call Detail Recordings can be retrieved by up to two polling systems.
The polled Call Detail Recordings are then available for processing via the Lucent
Technologies Cost Allocator Call Processing Accounting Management Solution.
The following are some of the Call Detail Recording Unit/SE highlights:
■ Stores 77000 Call Detail Recordings for a 24-word record
■ Stores 127000 Call Detail Recordings for an 18-word record
■ Supports 15-, 18-, and 24-word Call Detail Recordings including ISDN
■ Supports fixed and variable length Call Detail Recordings
■ Supports non-Lucent Technologies record formats up to 132 ASCII
characters plus end-of-record characters
■ Collects up to 3600 Call Detail Recordings per hour
■ Can be remotely-administered
■ Provides 72 hours of call record retention via 9-volt battery backup
■ Uses three filtering options based on input from the system to reduce the
number of useless Call Detail Recordings
■ Monitors/displays Call Detail Recordings as they are collected
■ Offers automatic initialization and power failure recovery
■ Supports polling or remote maintenance via a built-in, 1200 bps or 2400
bps modem