User`s manual

6
Getting started
Console installation
Router
Line 4 Line 2Line 3/4 Line 1/2
Plug the other
end of the
Ethernet cable
into a router.
Option 1: To connect four single line wall jacks
Plug the larger
end of the console
power adapter into
an electrical outlet
not controlled by a
wall switch.
If you have DSL high-
speed Internet service on
a particular line, a DSL
filter (not included) is
required on that line.
The DSL filter must
be plugged into the
telephone wall jack.
Plug one end of the
Ethernet cable into the
Ethernet jack (
Use only
Supplied
Adapter
L4 L3/4 L2 L1/2
5.1
MS2085 Engraving:
MS2015 Engraving:
Use only
Supplied
Adapter
) at the
back of the console.
Plug the other end of the
telephone lines into the
1-line telephone wall jacks.
Plug one end of the
telephone lines into
the L1/2, L2, L3/4
and L4 jacks at the
back of the console.
Plug the small end of the console
power adapter into the power jack
at the back of the console.
Router
Line 1Line 2Line 3Line 4
NOTE: If you are installing less than four telephone line cords to the console, plug the
telephone line cords starting from the L1/2 jack. Avoid having unoccupied telephone jack
between other occupied telephone jacks.