User`s manual

4
Plug the end of the coiled handset cord into
the
Use only Supplied Adapter
L4 L3/4 L2 L1/2
5.1
MS2085 Engraving: MS2015 Engraving:
Use only Supplied Adapter
jack on the left side of the telephone.
1.
Lift the kickstand as the arrows indicate below to release it from the
groove. There are seven pairs of grooves designed to hold the console at
different angles for optimum visibility.
2.
Make sure you plug in all telephone lines and the Ethernet cable
before powering up the console.
Getting started
Console installation