User`s manual

25
Caller ID
Caller ID operation
Save a caller ID entry to the directory (continued)
Store a signal for switching to temporary tone signaling. If you have dial
pulse (rotary) service, this signal is required for some special services.
Press or to choose Send tone, then press MENU/SELECT. A T appears
on the screen. All numbers you enter after this will send touch-tone signals
during dialing.
You can store the flash signal required by some special services as part of a
dialing sequence. Press or to choose Add flash, then press
MENU/SELECT. A F appears on the screen. Continue storing the number
as usual.
Press or to scroll to Done, then press MENU/SELECT. To exit without
making changes, press CANCEL.
NOTE: You will need to change how a caller ID number is dialed if the entry does not
appear in the correct format. Caller ID numbers might appear with an area code that
might not be necessary for local calls, or without a 1 that might be necessary for long
distance calls.
Delete entries
To delete a call history entry:
When in the caller ID history, press or to
scroll to the number you wish to delete.
Press DELETE to delete the shown entry from
the caller ID history.
The screen displays Caller ID deleted.
-OR-
When in the caller ID history, press or to
scroll to the desired number you wish to delete.
Press MENU/SELECT, then press or to
choose Delete.
Press MENU/SELECT, the screen displays
Caller ID deleted.
To delete all caller ID history entries:
When the console is idle, press CALL HISTORY.
2. Press DELETE. The screen displays All calls deleted, then returns to the
idle screen.
•
•
5.
1.
2.
3.
1.
2.
3.
1.
8002223111
Copy to DIR
Copy to 1-touch
>Delete
NEW 001/090