User`s manual

20
Telephone operation
One touch
Assign a one-touch entry (continued)
You can store the flash signal required by some special services as part of a
dialing sequence. Press or to choose Add flash, then press
MENU/SELECT. A F appears on the screen. Continue storing the number
as usual.
Press or to choose Done, then press MENU/SELECT to save the setting
and return to the previous menu. To exit without making changes, press or
to choose Cancel, then press MENU/SELECT, or press CANCEL to return to
the previous menu.
The screen displays Press a 1-touch key to save
the number.
Press the desired one-touch key to store the
telephone number in the upper location.
-OR-
Press LOWER, then press the desired one-touch key
to store the telephone number in the lower location.
The screen displays Number saved to 1-touch key
briefly, and then One Touch #XX (X represents the
one-touch location) and the telephone number or
extension number.
NOTE: If the one-touch location already has an assigned
number, the screen displays Replace 1-touch key memory?
Press MENU/SELECT to replace the old number with the
new one.
To dial a one-touch entry
When the console is idle, press the desired one-touch button for the
destination party in the upper location.
-OR-
When the console is idle, press LOWER then press the one-touch button for
the destination party in the lower location.
The console dials the one-touch number using the speakerphone.
•
6.
7.
8.
9.
Press a
1-touch key
to save the
number
One Touch #18
18002223111
Edit