User`s manual

11
Ringer volume
Use this feature to set the ringer volume to one of six levels or turn the ringer
off. When the ringer is off, the icon appears on the console screen. The
MS2085 console stores the volume setting for all lines.
When the console is idle, press MENU/SELECT.
Press or to scroll to Ringers, then press
MENU/SELECT or /SKIP.
Press MENU/SELECT again or /SKIP to select
Ringer Volume.
Press , , /REPEAT, /SKIP, or VOLUME on
the console to adjust the ringer volume.
Press MENU/SELECT to save the setting and return to
the previous menu. To exit without making changes,
press CANCEL.
-OR-
When the console is idle, press VOLUME to adjust
the ringer volume, then press MENU/SELECT to save.
NOTE: The ringer volume also determines the ringer volume for intercom calls. If the
console ringer volume is set to off, it is silenced for all incoming calls, including
intercom calls.
Ringer tone
Use this feature to choose one of the ten ringer tones for incoming calls. You
can choose different ringer tones for different lines so you can easily identify
which line is calling.
When the console is idle, press MENU/SELECT.
Press or to scroll to Ringers, then press
MENU/SELECT or /SKIP.
Press or to scroll to Ringer Tone, then press
MENU/SELECT or /SKIP.
Press or to select the desired line (Line 1,
Line 2, Line 3 or Line 4), then press MENU/SELECT or
/SKIP.
Press or to select the desired ringer tone.
Press MENU/SELECT or /SKIP to save the setting
and return to the previous menu. To exit without
making changes, press CANCEL or /REPEAT.
Repeat steps 4-6 above to choose ringer tones for
other lines if desired.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
Telephone settings
Telephone setup
Ringers
>Ringer Volume
Ringer Tone
Volume
Line 1
>Tone 1
Tone 2
Tone 3
Tone 4
Tone 5
Tone 6
Ringer Tone
>Line 1
Line 2
Line 3
Line 4