User`s manual

10
Prime line
Use this feature, also known as automatic line selection, to choose which line
is automatically selected each time you lift the handset or press
SPEAKER or HEADSET (if a corded headset is connected) to make an
outside call. If you select Auto, the console picks up any plugged telephone
line starting from Line 1.
To set the prime line:
When the console is idle, press MENU/SELECT.
Press MENU/SELECT again or /SKIP to select
System Setup.
Press or to scroll to Prime Line, then press
MENU/SELECT or /SKIP.
Press or to choose the desired line, then press
MENU/SELECT or /SKIP. To exit without making changes, press CANCEL.
NOTE: If you install less than four telephone line cords to the console and select Auto as
your Prime line setting, make sure you plug in your telephone line cords starting from
L1/2 jack. Avoid having any unoccupied telephone jack between other occupied
telephone jacks.
Line group
You can set an extension or several extensions to receive incoming calls from
a specific telephone line. Extensions that have not been selected will not ring
when there is an incoming call from that specific line. For the auto attendant
to work properly, you are recommended to include this console in the line
group settings of all lines.
When the console is idle, press MENU/SELECT.
Press MENU/SELECT again or /SKIP to select
System Setup.
Press or to scroll to Line Group, then press
MENU/SELECT or /SKIP.
Press or to choose the desired line and then
press MENU/SELECT or /SKIP.
The screen displays Set Ext to Ring. Press or to scroll to the desired
extension, then press MENU/SELECT. Repeat this step until all desired
extensions are selected.
The extensions marked with a tick will ring when there is an incoming
call from the line chosen in Step 4.
The extensions not marked with a tick do not ring when there is
an incoming call from the line chosen in Step 4, unless the caller
specifically tries to reach the extension through the auto attendant.
Press or to scroll to Done, then press MENU/SELECT to save the setting.
To exit without making changes, press CANCEL.
1.
2.
3.
4.
1.
2.
3.
4.
5.
•
•
6.
Prime Line
>Line 1
Line 2
Line 3
Line 4
Auto
Set Ext to Ring
>Reception 12 
Meeting room 23 
Ext 24 24 
Ext 25 25
Ext 26 26
Done
Getting started
System setup