User`s manual

7
Getting started
Console installation
Option 2: To connect two 2-line wall jacks
Use only
Supplied
Adapter
L4 L3/4 L2 L1/2
5.1
Router
Line 3/4 Line 1/2
Plug the larger
end of the console
power adapter into
an electrical outlet
not controlled by a
wall switch.
If you have DSL
high-speed Internet
service on a particular
line, a DSL filter (not
included) is required
on that line.
The DSL filter must
be plugged into the
telephone wall jack.
Plug one end of the
Ethernet cable into
the Ethernet jack
(
Use only
Supplied
Adapter
L4 L3/4 L2 L1/2
5.1
MS2085 Engraving:
MS2015 Engraving:
Use only
Supplied
Adapter
) at the back of
the console.
Plug the other end of the
telephone lines into the
2-line telephone wall jacks.
Plug the other
end of the
Ethernet cable
into a router.
Plug one end
of the black
telephone line
cord into the
L3/4 jack at
the back of the
console.
Plug one end of
the black telephone
line cord into
the L1/2 jack at
the back of the
console.
Plug the small end
of the console power
adapter into the
power jack at the
back of the console.
Router