User`s manual

73
Use this feature to reach your answering system remotely by calling any
telephone line connected this deskset from any touch-tone telephone. Make
sure the auto attendant feature of your MS2085 console is turned on for this
feature to work. Remote access can only play messages stored in the
private mailbox.
To remotely reach the answering system:
Dial any telephone line connected to the console from any
touch-tone telephone.
When the system answers, enter the three-digit remote access code (333
is the default code; see Remote access code on page 68 to change it).
You can also enter the following remote commands.
Remote commands:
1
Press to play to all messages.
1
Press to play all messages.
2
Press within three seconds of the message playing to go back
to the previous message.
Press after three seconds of the message playing to repeat the
message currently playing.
3
Press to skip the message.
7
Press to play private mailbox announcement.
Press 9 and wait for the beep before speaking.
Press # to stop recording.
•
•
8
Press to stop the message playing.
9
Press to start recording a memo.
Press # to stop recording.•
0
Press to turn the private mailbox on or off.
#
Press during a message playback to delete current message.
Press to delete all messages.
4. Hang up to end the call.
1.
2.
3.
Answering system
Remote access