User`s manual

33
Telephone operation
Telephone operation
To make a call using a corded headset:
Make sure a corded headset is connected to the deskset (page 20).
Press HEADSET on the deskset.
Wait for a dial tone, then dial the number.
To hang up, press HEADSET.
To make a call using a cordless headset:
You can make a call using a registered cordless headset (see Adding and
registering a cordless headset on page 18). For more details on the
cordless headset operation, refer to the TL7600 user’s manual.
Enter the telephone number. Press DELETE to make corrections.
Lift the handset or press SPEAKER to dial.
Press the ON/OFF button on the cordless headset.
To hang up, press the ON/OFF button.
On hook dialing (predialing)
Enter the telephone number. Press DELETE to make corrections.
Lift the handset or press SPEAKER to dial.
-OR-
To override automatic line selection, press LINE 1-LINE 4 for the desired
line, then lift the handset.
Full duplex speakerphone
During a call, press SPEAKER to switch between handsfree speakerphone
and normal handset use. Press SPEAKER again if you are using
speakerphone or place the handset on the deskset to hang up.
Answering a call
Lift the handset, or press the corresponding line key (LINE 1-LINE 4),
SPEAKER , HEADSET or the ON/OFF button on a registered cordless
headset to answer an incoming call.
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the ringer of the
deskset without disconnecting the call. Press MUTE to silence the ringer. The
next call rings normally at the preset volume.
1.
2.
3.
1.
2.
3.
4.
1.
2.