User`s manual

22
Getting started
System setup
Prime line
Use this feature, also known as automatic line selection, to choose which line
is automatically selected each time you lift the handset, or press
SPEAKER or HEADSET (if a headset is connected) to make an outside call.
If you select Auto, the deskset picks up any plugged telephone line starting
from Line 1.
To set the prime line:
When the telephone is idle, press MENU/SELECT.
Press MENU/SELECT again or /SKIP to choose
System Setup.
Press or to scroll to Prime Line, then press
MENU/SELECT or /SKIP.
Press or to choose the desired line, then press
MENU/SELECT or /SKIP. To exit without making
changes, press CANCEL.
NOTE: If you install less than four telephone line cords to the
MS2085 console and select Auto as your Prime line setting,
make sure you plug in your telephone line cords starting from
L1/2 jack. Avoid having any unoccupied telephone jack between
other occupied telephone jacks.
1.
2.
3.
4.
>System Setup
Ringers
Set Date/Time
One Touch
System Setup
Set Ext No.
>Prime Line
Network Setup
Prime Line
Line 3
Line 4
>Auto