User`s manual

9
Adding and registering a handset
To register a handset to your MS2085 console
Make sure the cordless handset is out of the
charger and the screen shows Choose Handset
in Registration at base menu. And put
handset on cradle to register.
On the MS2085 console, press MENU/SELECT
or /SKIP.
Press or to scroll to Registration
then press MENU/SELECT or /SKIP.
Press MENU/SELECT again or press
/SKIP to select Handset. The MS2085
console screen shows Registering
handset... (Put handset on cradle
to start).
Place the unregistered handset into the
charger. The handset screen displays
Registering... Please wait during
registration. The handset beeps once
and begins registering to the MS2085
console. It takes up to 60 seconds to
complete the registration. When the
registration is successful, the MS2085
console shows Handset registered.
NOTE: If the registration is not successful, the
console returns to the previous screen. To reset
the handset, remove the handset from the
charger. Try the registration process again.
1.
2.
3.
4.
5.
Choose Handset
in Registration
at base menu.
And put handset
on cradle to
register
System Setup
Ringers
Set Date/time
One Touch
Phone Settings
>Registration
Customer Support
Registering
handset...
(Put handset on
cradle to start)
Registration
>Handset
DECT Headset
Deregistration