User`s manual

4
Plug the end of the coiled handset cord into the
Use only Supplied Adapter
L4 L3/4 L2 L1/2
5.1
MS2085 Engraving: MS2015 Engraving:
Use only Supplied Adapter
jack on the left side of the telephone.
1.
Lift the kickstand as the arrow indicates below to release it from the
groove. There are seven pairs of grooves designed to hold the deskset at
different angles for optimum visibility.
2.
Make sure you plug in the Ethernet cable before powering up
the deskset.
Getting started
Deskset installation