User`s manual

9
Prime line
Use this feature, also known as automatic line selection,
to choose which line is automatically selected each
time you lift the handset, or press SPEAKER or
HEADSET (if a headset is connected) to make an
outside call. If you select Auto, the deskset picks up
any plugged telephone line starting from Line 1.
To set the prime line:
When the telephone is idle, press MENU/SELECT.
Press MENU/SELECT again or /SKIP to choose
System Setup.
Press or to scroll to Prime Line, then press
MENU/SELECT or /SKIP.
Press or to choose the desired line, then press
MENU/SELECT or /SKIP. To exit without making
changes, press CANCEL.
NOTE: If you install less than four telephone line cords to the MS2085 console and select
Auto as your Prime line setting, make sure you plug in your telephone line cords starting
from L1/2 jack. Avoid having any unoccupied telephone jack between other occupied
telephone jacks.
Ringer volume
Use this feature to set the ringer volume to one of six levels or turn the ringer
off. When the ringer is off, the icon appears on the deskset screen. The
MS2015 deskset stores the volume setting for all lines.
When the deskset is idle, press MENU/SELECT.
Press or to scroll to Ringers, then press
MENU/SELECT or /SKIP.
Press MENU/SELECT again or press /SKIP to select
Ringer Volume.
Press , , /REPEAT, /SKIP, or VOLUME on
the deskset to adjust the ringer volume.
Press MENU/SELECT to save the setting and return to
the previous menu. To exit without making changes,
press CANCEL.
-OR-
When the deskset is idle, press VOLUME to adjust
the ringer volume, then press MENU/SELECT to save.
NOTE: The ringer volume also determines the ringer volume for intercom calls. If the deskset
ringer volume is set to off, it is silenced for all incoming calls, including intercom calls.
1.
2.
3.
4.
1.
2.
3.
4.
5.
>System Setup
Ringers
Set Date/Time
One Touch
System Setup
Set Ext No.
>Prime Line
Network Setup
Prime Line
Line 3
Line 4
>Auto
Telephone settings
Telephone setup
System Setup
>Ringers
Set Date/Time
One Touch
Ringers
>Ringer Volume
Ringer Tone
Volume