Instruction manual

Automatic System Answer Delay (#110)
This System Programming procedure specifies the number of times (0–9) an
incoming call should ring before it is answered by the system.
Related Features
■
■
■
Automatic System Answer affects incoming calls only on lines identified
using
Automatic System Answer Lines (#204).
A button must be programmed on the MLS-display phone at extension 10 to
turn Automatic System Answer on and off. Use
Automatic System Answer
Button (#111)
to program the button.
To record the greeting callers hear when the system answers an incoming
call, use
Automatic System Answer Record/Playback.
Considerations
This feature works independently of Line Ringing, which determines how an
outside call rings at the extension—
immediately, after a 20 second delay, or not
at all. Automatic System Answer Delay specifies the number of rings a caller
hears before the system answers the call.
Valid Entries
0–9 (0 rings =
answered immediately)
2 ✔
Programming
To change the number of times an incoming call rings at extension 10 before the
system answers it:
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 1 ] [ 1 ] [ 0 ].
2.
To change the number of rings, press [ Next Data ] until the appropriate value
displays—see “Valid Entries” above.
3.
Select another procedure or exit programming mode.
5-18 Automatic System Answer Delay (#110)