Instruction manual

Standard Phone
If a standard phone user intends to place intercom calls and access system
features, Automatic Line Selection for his or her extension must be set to
“intercom first” for proper operation. For example, the setting for a standard
phone in a lobby, used for calling employees or making local calls on line 1,
would be set to “Intercom, 1.”
Programming
To program Automatic Line Selection for an extension:
1.
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2.
Enter the number of the extension to be programmed for Automatic Line
Selection.
3. Press [ ✳ ] [ ✳ ].
4.
Press the line and/or intercom buttons in the desired order. For each button
pressed, the display reads:
Auto Line Select
5.
To exit Automatic Line Selection, press [ ✳ ] [ ✳ ].
6.
Press [ Central Tel Program ] and enter a new extension number or exit
programming mode.
Automatic Line Selection
5-15