Instruction manual
Examples
The examples below show some possible entries for an Auto Dial number in
Step 4 of “Programming.”
■
■
■
Outside Phone Number.
Enter the phone number (up to 20 digits) exactly
as you would dial it. For example, to program 555-2398, press [
5
] [
5
] [
5
] [
2
]
[
3
] [
9
] [
8
].
Extension Number.
Press the left [
Intercom
] button and the two-digit
extension number. Include a [
✳
] before the extension number to voice
signal an extension. For example, to program extension 20 for voice
signaling, press [
Intercom
] [
✳
] [
2
] [
0
]. The display reads:
Intercom *2O
Dial-Code Feature.
Enter the appropriate code. For example, to program
the Message Light On feature code and extension 20 on a button, press
[
Feature
] [
0
] [
9
] [
2
] [
0
].
Programming
To program an Auto Dial button:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
Central Tel Program
].
2.
Enter the number of the extension to be programmed.
3.
Press a programmable button.
4.
Enter an outside phone number, feature code, account code, or PBX/Centrex
feature access code; or press left [
Intercom
] and enter an extension number.
5.
Repeat Steps 3 and 4 to program additional Auto Dial buttons, or exit
programming mode.
Using
To dial an outside number or extension number (you can lift the handset or
press [
Spkr
] first, but you do not have to do so):
1.
If you want to call on a specific line, press the line button (or dial [
8
] and the
two-digit line number) before pressing the Auto Dial button.
If you did not lift the handset, the lights next to [
Spkr
] and [
Mic
] go on, and
you are active on the speakerphone.
2.
Press the Auto Dial button on which the outside number or extension number
is programmed.
The systern automatically selects a line if you did not specify one, turns on
the speaker (if the handset is on the hook), and dials the Auto Dial number.
The number being dialed will show on display phones.
To dial a feature code, follow the directions for the feature you want to use.
5-12
Auto Dialing