Instruction manual
3.
4.
5.
6.
7.
Dial the extension number to be programmed.
Buttons on which lines are assigned for the extension light up to show the
current Line Ringing settings. Remaining buttons can be programmed
with Auto Dial numbers or features.
At this point, you can:
■
Use
Automatic Line Selection
to change the order in which the
telephone tries to select a line when the user picks up the handset.
(If you want to change
Automatic Line Selection
for an extension, you
must do so immediately after you enter programming mode and select
the extension.)
■
Use
Line Ringing
to change the ringing for an individual line.
■
Program
Personal Speed Dial Numbers
or
Auto Dial
numbers or
features.
To program another button, press the new button, then dial the feature code.
To change the settings for another extension, press [
Central Tel Program
], then
dial the new extension number.
To erase a button feature, press the button, then press [
Mic
].
To end programming:
■
Dial [
Feature
] [
0
] [
0
] or
■
Lift the handset off-hook, then place it back in the cradle.
Using Extension Programming
Users can program features or store telephone numbers on buttons from their
own phones using Extension Programming.
Automatic Line Selection
and
Line Ringing
must be programmed using Centralized Telephone Programming;
all other features can be programmed using a system phone at the user’s
extension. If the user has a standard phone, Personal Speed Dial numbers for
the extension must be programmed using Centralized Telephone Programming.
To program at the extension, use the following procedure:
1. To start programming, dial [
Feature
] [
0
] [
0
].
Buttons on which lines are assigned for the extension light up to show the
current Line Ringing settings. Remaining buttons can be programmed
with Auto Dial numbers or features.
2.
To change the programming for a button, press the button, then dial the code
for the feature.
You can also program Personal Speed Dial numbers for the extension.
3.
To program another button, press the new button, then dial the feature code.
To erase a button feature, press the button and then press [
Mic
].
4.
To end programming:
■
■
Dial [
Feature
] [
0
] [
0
] or
Lift the handset off-hook, then place it back in the cradle.
Programming
2-19