Instruction manual

VMS Hunt Schedule (#507)
Description
This System Programming procedure determines whether the outside lines
assigned to Hunt Group 7 hunt through the VMS Hunt Group all the time, only
during “Day” operation (Night Service is off), or only during “Night” operation
(Night Service is on). This feature affects only the Automated Attendant service
of PARTNER MAIL.
Related Features
Use
Group Call Distribution (#206)
to assign lines to the VMS Hunt Group.
Use
Hunt Group Extensions (#505)
to assign extensions to the VMS Hunt
Group.
Use
Night Service Button (#503)
to program a Night Service button for
extension 10.
Considerations
This feature requires special hardware. For more information, see “PARTNER
MAIL” in Chapter 4.
Valid Entries
1 = Always
2 = Day Only
3 = Night Only
Programming
To change the VMS Hunt Schedule setting for PARTNER MAIL’s Automated
Attendant service:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
5
] [
0
] [
7
].
2. If you want to change the setting to day only, press [
Next Data
] until the display
reads:
VMS HuntSchedule
2 Day Only
If you want to change the setting to night only, press [
Next Data
] until the
display reads:
VMS HuntSchedule
3 Night Only
3.
Select another procedure or exit programming mode.
5-132
VMS Hunt Schedule (#507)