Instruction manual

VMS Hunt Delay (#506)
Description
This System Programming procedure determines when outside calls should be
answered by PARTNER MAIL for Automated Attendant service. You can set the
system for either immediate call handling or delayed call handling. Delayed call
handling allows the receptionist to answer calls first.
Related Features
■
Use Group Call Distribution (#206) to assign lines to the VMS Hunt Group.
■
Use Hunt Group Extensions (#505) to assign extensions to the VMS Hunt
Group.
Considerations
This feature requires special hardware. For more information, see “PARTNER
MAIL” in Chapter 4.
Valid Entries
1 = Immediate ✔
2 = Delayed
Programming
To change the VMS Hunt Delay setting for PARTNER MAIL’s Automated
Attendant service:
1.
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 5 ] [ 0 ] [ 6 ]. The
display reads:
VMS Hunt Delay
1 Immediate
2.
If you want to change the setting, press [ Next Data ] until the display reads:
VMS Hunt Delay
2 Delayed
3.
Select another procedure or exit programming mode.
VMS Hunt Delay (#506)
5-131