Instruction manual
Toll Call Prefix (#402)
Description
This System Programming procedure indicates whether users must dial a 0 or 1
before the area code to make a long-distance call, or just the area code and
number. This feature should be set to reflect the dialing patterns of your local
Related Features
telephone company.
This procedure affects the operation of dialing restrictions and permissions. For
more information, see
Allowed Phone Number Lists (#407), Disallowed
Phone Number Lists (#404),
and
Emergency Phone Number List (#406).
Valid Entries
1 = 0 or 1 required before Area Code and Number
✔
2 = Area Code and Number Only
Programming
To change the Toll Call Prefix setting:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
4
] [
0
] [
2
].
2.
To change the setting, press [
Next Data
] until the appropriate value
displays—see “Valid Entries” above.
3.
Select another procedure or exit programming mode.
5-124
Toll Call Prefix (#402)