Instruction manual

Save Number Redial (F04)
Description
This feature saves into temporary memory the last outside number dialed from
an extension. Users can use this feature to save a number before they hang up
on a busy or non-answering call. Once saved, the number can be redialed
again at any time using this feature. The number stays in memory until a
different one is saved.
Related Features
Unlike Last Number Redial, this feature lets the user make other calls before
redialing the saved number.
Considerations
■
■
■
■
If the number was dialed using a System Speed Dial number, it cannot be
saved using this feature.
When this feature is programmed on a button, you can press the button to
save the number and press the button again to redial it later.
You can program this feature on more than one button to save more than
one number.
This feature is available only on system phones.
Programming
You can program the Save Number Redial feature code on an Auto Dial button,
to access the feature with one touch. To program the button:
1.
Press [
Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2. Enter the number of the extension to be programmed with this feature.
3.
Press a programmable button.
4. Press [
Feature ] [ 0 ] [ 4 ].
5.
Program another button for this extension or exit programming mode.
Using
To store a number:
1.
Press the programmed button or dial [
Feature ] [ 0 ] [ 4 ] after dialing the number
you want to store, but before hanging up.
To redial a stored number:
1. Press the programmed button again or dial [
Feaure ] [ 0 ] [ 4 ] again instead of
dialing the number.
Save Number Redial (F04)
5-111