Instruction manual
Night Service Group Extensions (#504)
Description
This System Programming procedure assigns extensions to the Night Service
Group. When Night Service is on and a call comes in, all extensions in the Night
Service Group ring immediately, regardless of normal Line Ringing settings.
Related Features
■
Use
Night Service Button (#503)
to program the button that is used to turn
Night Services on and off.
■
If you program a
System Password (#403),
when Night Service is on, users
in the Night Service Group can dial only numbers on the
Emergency Phone
Number List (#406)
and Marked
System Speed Dial Numbers
without
entering the System Password.
Considerations
■
Do not include extensions with PARTNER Attendants, PARTNER MAIL,
hotline phones, or doorphones in the Night Service Group.
■
A user in the Night Service Group can receive an after-hours outside call
only if it comes in on a line that is assigned to that user’s phone. (Phones
with different line assignments can be part of the same Night Service group.)
Valid Entries
1 = Assigned to group
2 = Not Assigned to group
✔
Programming
To assign extensions to the Night Service Group:
1.
2.
3.
4.
5.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
5
] [
0
] [
4
]. The
display reads:
NS Group
Extension:
Enter the number of the extension to be programmed. For example, to
program extension 13, press [
1
] [
3
].
To assign or unassign the extension, press [
Next Data
] until the appropriate
value displays—see “Valid Entries” above.
To assign or unassign another extension, press [
Next Item
] or [
Prev Item
] until the
extension number shows on the display. Then repeat Step 3.
Select another procedure or exit programming mode.
Night Service Group Extensions (#504)
5-99