Instruction manual

Message Light Off (F10XX)
Description
This feature turns off the Message Light at a specified extension with a system
phone (where XX is an extension number from 10–57).
Related Features
For instructions on turning on the Message Light, see Message Light On.
Considerations
■
■
This feature affects the message light only on MLS-model system phones.
However, any phone can turn on or off a message light.
Do not use this feature for an extension with PARTNER MAIL. PARTNER
MAIL automatically turns off the message light at a subscriber’s extension
when messages in the mailbox have been retrieved.
Programming
To program the button:
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2. Enter the number of the extension to be programmed with this feature.
3.
Press a programmable button.
4.
Press [ Feature ] [ 1 ] [ 0 ].
5.
Optionally, dial the two-digit extension number of your most common
destination, or skip to Step 6 if you want only the feature code on the
button.
6.
Program another button for this extension or exit programming mode.
Using
System Phone
1. Press the programmed button or dial [ Feature ] [ 1 ] [ 0 ].
If you programmed the destination extension number on the button, the
Message Light for the destination extension goes off. Skip Step 2.
2. If no extension number was programmed on the button, dial the extension
number of the phone whose light you want to turn off, or use an Auto Dial
button or Manual Signaling button.
Standard Phone
1.
Lift the handset.
2.
Dial [ # ] [ 1 ] [ 0 ].
3. Dial the extension number of the phone whose light you want to turn off, or use
an Auto Dial button or Manual Signaling button.
5-94 Message Light Off (F10XX)