Instruction manual

5.
Dial the two-digit extension number of the destination extension. For example,
to identify extension 22 as the destination extension, press [
2 ] [ 2 ]. (Enter
[
✳ ] before the extension number if you want to use the button for voice
signaling.)
6. Program another button for this extension or exit programming mode.
Using
■
■
■
To manually signal the target extension:
While the handset is on-hook, press the programmed button. The extension
will beep for as long as the button is pressed.
To ring or voice signal the target extension:
Lift the handset or press [
Spkr ], then press [ Intercom ] and the programmed
button.
To transfer a call to the target extension:
While active on the call, press [ Transfer ] and then the programmed button.
Manual Signaling (F13) 5-93