Instruction manual
Loudspeaker Paging
Description
This feature accesses the loudspeaker paging system, if you have one
connected to the system via the PAGE jack on the processor module.
Related Features
You can specify the loudspeaker paging system as a hotline alert extension so
that the hotline phone can be used to make announcements over the
loudspeaker. For more information, see
Hotline (#603).
Programming
You can program the Loudspeaker Paging feature code on an Auto Dial button
to access the loudspeaker with one touch. To program the button:
1. Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
Central Tel Program
].
2.
Enter the number of the extension to be programmed with this feature.
3.
Press a programmable button.
4.
Press left [
Intercom
] [
7
] [
0
].
5.
Program another button for this extension or exit programming mode.
Using
System Phone
To make an announcement:
1.
Press the programmed button and lift the handset, or lift the handset and
press [
Intercom
] [
7
] [
0
].
2.
Speak into the handset. (To avoid feedback, do not use the speakerphone.)
Your voice is heard through the loudspeaker system.
If your paging system supports announcements to zoned areas, refer to the
instructions packaged with the device to make zoned announcements.
Standard Phone
To make an announcement:
1.
Lift the handset.
You hear intercom dial tone.
2.
Dial [
7
] [
0
].
2.
Speak into the handset.
Your voice is heard through the loudspeaker system.
For touch-tone phones only, if your paging system supports announcements to
zoned areas, refer to the instructions packaged with the device to make zoned
announcements.
5-88
Loudspeaker Paging