Instruction manual

Programming
To identify a Hotline extension and its alert extension:
1.
2.
3.
4.
5.
6.
Using
1.
2.
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 6 ] [ 0 ] [ 3 ].
At the
Extension: prompt, enter the hotline extension number—see “Valid
Entries” on the previous page. For example, to program extension 33 as
the hotline, press [ 3 ] [ 3 ].
At the Data — prompt, enter the alert extension number—see “Valid Entries”
on the previous page. For example, to use extension 32 as the alert
extension, press [
3 ] [ 2 ]. The display reads:
Hot Line 33
Data 32
To identify another hotline and alert extension pair, press [ Next Item ] or
[
Prev Item ] until the new hotline extension number shows on the display.
Then repeat Step 3.
Repeat Step 4 for each hotline and alert extension pair that you want to
identify.
Select another procedure or exit programming mode.
Lift the handset of the hotline phone.
The designated alert extension rings.
When the call is answered, speak into the handset.
5-76 Hotline (#603)