Instruction manual

Programming
To create an Emergency Phone Number List:
1.
2.
3.
4.
5.
6.
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 4 ] [ 0 ] [ 6 ]. The
display reads:
EmergencyList
Entry:
Select a list entry (01–10). For example, to select entry 03, press [ 0 ] [ 3 ]. The
display reads:
EmergencyList 03
Data ------------
Enter the telephone number.
To save the telephone number in memory, you must press [ Enter ].
At this point:
■ To enter other phone numbers, press [ Next Item ] to select a different list
entry and repeat Steps 3 and 4.
■ To change the phone number you just entered, press [ Remove ] and
enter the correct phone number, then press [ Enter ].
■ To delete the phone number you just entered, press [ Remove ].
Select another procedure or exit programming mode.
5-58 Emergency Phone Number List (#406)