Instruction manual

Doorphone Alert Extensions (#606)
Description
This System Programming procedure identifies up to 48 extensions to ring when
a doorphone button is pressed. When a person uses the doorphone, it rings all
alert extensions at the same time. If the alert extension is a system phone, the
call rings with a unique ding-dong sound to distinguish it from other calls.
Additionally, if you have two doorphones, they will ring with different tones so
you can distinguish between them.
Related Features
Use
Doorphone Extensions (#604 and #605)
to identify the extensions to
which doorphones are connected.
If
D
O
Not Disturb
is active at a doorphone alert extension, the person at the
doorphone will hear signaling, but the alert extension will not be signaled.
Valid Entries
1 = Not an Alert Extension
2 = Doorphone 1 Alert Extension
3 = Doorphone 2 Alert Extension
4 = Doorphones 1 and 2 Alert Extension
Programming
To identify doorphone alert extensions:
1.
2.
3.
4.
5.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
][
#
] [
6
] [
0
][
6
]. The
display reads:
DoorPhneAlert
Extension:
Enter the first alert extension number (10–57). For example, to identify
extension 10, press [
1
] [
0
].
To change the alert status, press [
Next Data
] until the appropriate value
displays—see “Valid Entries” above.
To identify another alert extension, press [
Next Item
] or [
Prev Item
] until the
extension number shows on the display. Then repeat Step 3.
Select another procedure or exit programming mode.
Doorphone Alert Extensions (#606)
5-55