Instruction manual
Display Language (#303)
Description
This System Programming procedure identifies the language display messages
will appear in, if the extension has an MLS-34D, MLS-18D, or MLS-12D phone.
The language is set for each extension, so phones in the same system can
display different languages.
Considerations
If SMDR is used, the call report header will be printed in the language specified
for extension 10.
Valid Entries
1 = English
✔
2 = Spanish
3 = French
Programming
To change the Display Language setting for an extension:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
][
3
] [
0
] [
3
]. The
display reads:
Language
Extension:
2.
Enter the number of the extension to be programmed. For example, to
program extension 11, press [
1
] [
1
]. The current display language
displays.
3.
To change the display language, press [
Next Data
] until the appropriate value
displays—see “Valid Entries” above.
4.
To change the display language for another extension, press [
Next Item
] or
[
Prev Item
] until the extension number shows on the display. Then repeat
Step 3.
5.
Select another procedure or exit programming mode.
5-52
Display Language (#303)