Instruction manual

Direct Extension Dial Button (#113)
Description
This System Programming procedure identifies a button on the system phone at
extension 10 to be used to turn Direct Extension Dial on and off.
Related Features
Direct Extension Dial affects incoming calls only on lines identified using
Direct Extension Dial Lines (#205).
Calls that ring on lines programmed with Direct Extension Dial are picked up
after 2 rings, as a default. To change this number, use
Direct Extension
Dial Delay (#112).
To record a message to prompt callers to dial an extension number or Hunt
Group number after the system answers an outside call, use
Direct
Extension Dial Record/Playback.
Considerations
A Direct Extension Dial button must be programmed on a button with lights
on the MLS-model display phone at extension 10. (This feature will not work
if it is programmed on a button without lights.)
This feature is not available on standard phones.
Valid Entries
1 = Assigned
2 = Not Assigned
3 = Select button (and then press a programmable button to assign Direct
Extension Dial to that button)
Programming
To assign or unassign a Direct Extension Dial button with lights at extension 10:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
1
] [
1
] [
3
].
2.
If you want to assign Direct Extension Dial to the first available button on the
system phone, press [
Next Data
] until the display reads:
DXD Button
1 Assigned-Ext 10
If you want to unassign Direct Extension Dial, press [
Next Data
] until the
display reads:
DXD Button
2 Not Assigned
Direct Extension Dial Button (#113)
5-37