Instruction manual

3. To change the access code
press
Hear the current code.
4. Enter the new access code, then
press
A confirmation message plays.
5. Record this change on the Installation Data Form in Appendix A.
Blocking Lines for Off-Site Message Alert
If you have any special-purpose telephone lines, such as WATS lines, Foreign
Exchange lines, or 800 numbers, you should block these lines so that the off-site
message alert feature will not use them to place outgoing calls.
To block a line for use:
1.
2.
3.
4.
5.
Enter administration mode.
To change Control Unit integration parameters
press
To block lines for off-site message alert
press
Enter the line number to be blocked
press
Repeat as required for additional lines.
95
Chapter 9: Other Administration Items