Instruction manual

Chapter 9: Other Administration Items

Occasionally you may need to change some of the customization parameters set during

the installation process. This chapter describes how to make these changes.

Changing the System Date and Time

The installer initially sets the system date and time. If there is an extended power

failure, or when daylight savings time changes, you can change the clock that the

CLASSIC MAIL system uses to determine day or night operation. When entering date

and time information, use five or six digits that represent the month, day, and the

year; for example, June 30, 1992 would be entered as 63092. Use three or four digits

for the hour and minutes; for example, 829 for 8:29, 1115 for 11:15. Finally, you

designate a.m. or p.m.

To change the system date and time:

1. Enter administration mode.

2. To change system parameters

press

3. To change the system date and time

press

Hear the current date.

Chapter 9: Other Administration Items