Instruction manual

Changing the Attendant’s Intercom Number
The CLASSIC MAIL system always gives incoming callers the option of calling an
attendant. For example, incoming callers always hear the instruction, “Please enter
the extension number you wish to call, or press pound to use the company directory. To reach
an attendant, press zero or just stay on the line.
“
If a caller presses zero, the CLASSIC
MAIL system will transfer the caller to the attendant’s intercom number. This
number was set during installation and is recorded on the Installation Data Form in
Appendix A.
To change the attendant’s intercom number:
1. Enter administration mode.
2. To change system parameters
press
3. To change the attendant’s intercom number
press
A message of the current number
attendant’s intercom number plays.
4. Enter a new intercom number for the attendant
OR if you want none
A confirmation message plays.
press
Chapter 7: Administering Mailboxes
73