Instruction manual

Figure 4F Telephone
Message Lights
To install the CLASSIC MAIL System Message Light Panel, follow the instructions
included in the CLASSIC MAIL System Message Light Panel Kit.
Using the Message Waiting Light on Your Telephone
The CLASSIC MAIL system works with your Merlin Control Unit to turn on your
telephone’s message light whenever you have a message.
To use this feature, you must have the Merlin Send Message feature installed in your
Control Unit. If you have a Merlin system 206, 410 or 820 Control Unit, you need
a Feature Package 2 cartridge installed to make the Send Message feature work. See
your Installation Data Form in Appendix A to determine if you have this feature
installed. The Send Message feature is installed in all versions of the Merlin Plus
Control Unit.
If you have the Send Message feature installed in your Control Unit, and you want
the CLASSIC MAIL system to control your telephone’s message light, follow the next
procedure.
Message
Light
Message
Light
Message
Light
CLASSIC MAIL System Reference Guide
Part 1: Installing the CLASSIC MAIL System