Instruction manual

Table 4C. Message
Storage Capacities
CLASSIC MAIL
HARD DISK
MESSAGE STORAGE
SYSTEM
SIZE/ SOFTWARE
CAPACITY
COM-CODE
407041920
85 MB/1.5 SW 6.5 Hours ( 4-port system)
407041912
85 MB/1.5 SW
3 Hours ( 2-port system)
407162866 170 MB/1.6 SW
13 Hours ( 4-port system)
407162916
170 MB/1.6 SW
6.5 Hours ( 2–port system)
Maximizing Telephone System Performance
If you have unused (vacant) outside line jacks on your Merlin Control Unit, you can
use them to maximize the overall performance of your telephone system. Consider
using these vacant jacks as access lines to the CLASSIC MAIL system. Access lines are
the lines you use to retrieve your messages from the CLASSIC MAIL system.
The benefit of this option is that you can retrieve messages from a Merlin telephone
without using any of your actual outside lines. This eliminates the possibility that
incoming callers would get a busy signal if they call when all your outside lines are
in use retrieving messages.
An example of this installation is shown in Figure 4D. Note that in this example, the
incoming lines do not connect directly to the CLASSIC MAIL system; instead, two
vacant outside line jacks are used to connect the CLASSIC MAIL system to your
CLASSIC MAIL System Reference Guide
Part 1: Installing the CLASSIC MAIL System