Instruction manual

The CLASSIC MAIL System line Numbering Conventions

Throughout this guide, and during the operation of the CLASSIC MAIL system,

references will be made to line numbers.

Line numbers are used to identify a

particular outside line plugged into your Merlin Control Unit. The line labeling

convention used on the Control Unit is that the line plugged into Control Unit

outside line jack A is called line A; line B is plugged into jack B, and so forth. The

CLASSIC MAIL system alters this convention slightly by referring to lines by

numbers; for example, when transferring a call to you it may say, "You have a call on

line 1." This means that you have a call on the line plugged into control unit jack A,

which is normally the first outside line button on your telephone. Table 3J shows the

CLASSIC MAIL system line numbering convention. These line designators corre-

spond to specific outside line buttons on Merlin telephones. See Figure 3K.

Merlin Line Designators

ABC DEFG H

CLASSIC MAIL Designators 1 2 3 4 5 6 7 8

Fjgure 3I: Merlin Telephone

with voice mail labels in place

Table 3J: Line Numbering

Conventions

Chapter 3: Standard Installation