Instruction manual

9. Plug the other end of this cable into the interposed line 2 jack of the CLASSIC MAIL
system. Telephone service should now be restored to normal operation.
10. Perform Test 1.
Note: If you are installing a four-port CLASSIC MAIL system, install two additional interposed line cables
between your Control Unit outside line jacks and the CLASSIC MAIL system interposed line jacks 3 and
4. Use procedures similar to those explained in the previous steps 6-10.
TEST 1
Call each outside line connected to the CLASSIC MAIL system. For example, if C and D are
the outside lines connected to the CLASSIC MAIL system:
1. Press line button corresponding to line C. Dial the seven-digit telephone number of line D.
The corresponding line D button should ring.
2. Hang up.
3. Repeat the procedure using line D to call line C.
If this test fails, turn to turn to Chapter 10, “Troubleshooting Tables.”
Chapter 3: Standard Installation
25