Instruction manual

7.
8.
CLASSIC MAIL System Reference Guide
If you have any outside lines that are WATS lines, Foreign Exchange (FX) lines, or
800 lines, check the corresponding block on the Installation Data Form and see the
recommended installation options.
Determine the intercom number (often 0 or 10) of the person who normally answers
your incoming calls. If you don’t have a person who does this, use the intercom
number of the person you designate as the CLASSIC MAIL system attendant. Record
this number in the Attendant’s Intercom Number block on the Installation Data Form.
The remainder of the information on the form will be entered later.
The CLASSIC MAIL System
Your CLASSIC MAIL system includes the following parts:
●
●
●
●
●
●
●
CLASSIC MAIL System. See Figure 2B
CLASSIC MAIL System Mounting Screws (5)
Telephone Emulation Cables (2 or 4, depending on the CLASSIC MAIL
system size)
Interposed Line Cables (2 or 4, depending on the CLASSIC MAIL system
size)
CLASSIC MAIL System Power Supply and Mounting Bracket
Voice Mail Labels
CLASSIC MAIL System Mounting Template
Part 1: Installing the CLASSIC MAIL System