Instruction manual

CLASSIC MAIL System Reference Guide
2.
3.
4.
5.
6.
If your Control Unit is a Merlin system 206, 410, or 820, determine the type of
feature package it has. Feature packages are cartridges that plug into the opening
on the upper right front side of the Control Unit. See Figure 2A.
If your Control Unit has a cartridge installed, (some do not) and if this cartridge is
labeled “Feature Package 2,” record this information on the Installation Data Form.
See Appendix A.
If your Control Unit is a Merlin Plus system, or has Feature Package 2 installed, see
the Installation Data Form for recommended installation options.
Determine the quantity and location of any vacant voice terminal jacks in your
Control Unit. See Figure 2A. Voice terminal jacks are the numbered jacks on the
front of the Control Unit. Depending on your Control Unit type, they are numbered
0–5, 10-19, or 10-29. Vacant jacks are the ones that do not have cables plugged in.
Record the jack numbers of two vacant voice terminal jacks. You need at least two
vacant voice terminal jacks to complete the standard CLASSIC MAIL system
installation. If you have more than two vacant voice terminal jacks, see the
Installation Data Form for recommended installation options.
Determine the quantity and location of any vacant outside line jacks in your Control
Unit. See Figure 2A. Outside line jacks are the lettered jacks on the front of the
Control Unit. Depending on your Control Unit type, they will be lettered A-B, A-D, or
A–H. Record the jack letters of any vacant outside line jacks. If you have more than
two vacant outside line jacks, see the Installation Data Form for recommended
installation options.
Part 1: Installing the CLASSIC MAIL System