Instruction manual

Appendix A: Installation Data Form
Recommended Installation Options
Control Unit Type
1.
Merlin Plus ❑
Merlin 820 ❑
Is Feature
Package 2
Merlin 410 ❑
Installed?
Merlin 206 ❑
❑ YES ❑ NO
2.
Merlin 1030/3070 (See CLASS/C MAIL System Contro/ Unit
Upgrade Kit Installation Guide.)
If either the Merlin Plus or the Merlin 820 block is checked, AND you
are installing a two-port system, consider expanding the installation to
four ports. Read Chapter 3, then the Chapter 4 section, “Expanding a
Two-Port Installation” before doing any installation work.
If either the “Merlin Plus” or the “Feature Package 2“ YES block is
checked, read Chapter 3, then read Chapter 4, “Using Message Waiting
Lights on Your Merlin Telephones” before doing any installation work.
Vacant Merlin Control Unit Jacks
1.
Vacant Voice Terminal jacks
Jack Numbers
Vacant Outside Line jacks
2.
Jack Number
If you have three or more vacant Voice Terminal jacks, and you are
installing a two-port system, read Chapter 3, then the Chapter 4 section,
“Expanding a Two-Port Installation” before doing any installation work.
If you have vacant Outside Line jacks, read Chapter 3, then read the
Chapter 4 section, “Maximizing Your Telephone System’s Performance”
before doing any installation work.
Special Outside Line Types
Do you have any WATS lines, Foreign Exchange (FX) lines, or incoming 800
If YES, see Chapter
4, “Using the CLASSIC MAIL System
with WATS lines, FX lines, or 800 numbers”.
numbers?
❑ YES ❑ NO
Misc. Information
Attendant’s Intercom/Mailbox Number
Administrator’s Mailbox Number
CLASSIC MAIL System Access Code
Attendant’s Password
Administrator’s Password
( Default is
)
CLASSIC MAIL System Access Line Designators
Phone #
Line Designator
of outside line jack 1/interposed
Phone #
Line Designator of outside line jack 2/interposed
Phone #
Line Designator
of outside line jack 3/interposed
Phone #
Line Designator of outside line jack 4/interposed
line jack 1
line jack 2
line jack 3
line jack 4
Appendix A: Installation Data Form
113