Instruction manual

Figure 10A
Line button assignments for typical
Merlin Control Unit (left), and for
Merlin 1030/3070 Control Unit
(right).
For the initialization process to work correctly, the line button assignments on the
Merlin voice terminal ports must be set to the proper state. To verify that the line
button assignments are set to the proper state, perform Test 7.
TEST 7
For each telephone emulation cable installed:
1. Unplug the telephone emulation cable that is plugged into the CLASSIC MAIL system's
telephone emulation jack.
2. Plug the end of this cable into a Merlin 34–button telephone.
System Reference Guide
Part 2: CLASSIC MAIL System Administration