Instruction manual

3. To gain access to the CLASSIC MAIL system
disconnect parameters
press
System Reference Guide
To turn on the CLASSIC MAIL system disconnect parameter:
1. Enter administration mode.
2. To change Control Unit integration parameters
press
4. To turn on/off disconnect supervision
press
If the disconnect parameter is turned on, the CLASSIC MAIL system will perform a
disconnect test before transferring any call. Prior to initiating a transfer, the CLASSIC
MAIL system will momentarily go “on hook” for a period of one second, then “off
hook” for a period of five seconds. If no dial tone is detected by the CLASSIC MAIL
system during the five second period, it will transfer the call; if dial tone is detected,
the CLASSIC MAIL system will hang up. These on and off hook timing parameters
are adjustable to match the characteristics of various types of telephone company
lines. Consult your CLASSIC MAIL system dealer prior to making any adjustments
to these timing parameters.
Resetting the System
Resetting the CLASSIC MAIL system will erase most of the customization informa-
ion you have entered. After the CLASSIC MAIL system is reset, all mailboxes are
deleted and all system parameters except line configuration parameters return to
their original default values. Resetting the CLASSIC MAIL system can take up to five
minutes.
Part 2: CLASSIC MAIL System Administration