Instruction manual

To enable/disable the Touch Tone Gate:
1. Enter administration mode.
2. To change Control Unit integration parameters
3. To enable the Touch Tone Gate feature
Adjusting the CLASSIC MAIL System Disconnect Parameters
press
press
The CLASSIC MAIL system will automatically hang up during any call whenever it
hears several seconds of “dial tone.” If you have the type of outside lines that do not
supply dial tone after a caller has hung up, the CLASSIC MAIL system may not
properly disconnect at the end of some calls. Symptoms of this problem can include:
occasional calls transferred to the operator that are either silent, or are playing a
telephone company recording similar to, “If you would like to make a call . . ...” Other
symptoms can include messages recorded in the CLASSIC MAIL system General
Delivery mailbox that are either: silent, a telephone company “howler tone,” or are
playing a telephone company recording similar to, “If you would like to make a
call . . ...”
You can correct these conditions by turning on the CLASSIC MAIL system
disconnect supervision parameter.
Chapter 9: Other Administration Items
101