Instruction manual

To change the call transfer type:
1.
Enter administration mode
2.
To change Control Unit integration parameters
3. To change the call transfer type
4. The message confirming the current transfer type plays.
press
press
5. To change the call transfer type
press
Enabling the Touch Tone Gate
The Touch Tone Gate is a programmable feature that will quickly determine whether
a incoming caller is dialing from a rotary telephone. If the Touch Tone Gate is
enabled, callers must dial a Touch Tone digit before the top-level menu will play. If
no digit is dialed, the caller will be transferred to the attendant within three seconds
of the completion of the company greeting. Enable the Touch Tone Gate feature
only if you tend to receive calls from callers using rotary phones.
If you enable the Touch Tone Gate feature, you must include the following
instructions as part of your Company Greeting:
"If you are calling from a Touch Tone
phone, please press any digit now. Otherwise, stay on the line and your call will be
transferred to an attendant."
System Reference Guide
Part 2: CLASSIC MAIL System Administration