Instruction manual

To hear the status of a line’s configuration, or to change a line configuration:
1. Enter administration mode.
2. To change Control Unit integration parameters
press
3. To hear/change line configuration
press
4. Enter the line number and follow the instructions.
5. Repeat as required for additional lines.
If you make any changes to a line’s configuration, you must turn the CLASSIC MAIL
system off, then on, before the change becomes effective.
Resetting Line Configuration and Control Unit Type
To erase information about the line configuration and Control Unit type stored in
the CLASSIC MAIL system’s memory, follow the procedure below. This causes the
CLASSIC MAIL system to repeat the self-initialization process described in the
section “Changing the Line Configuration. ”
Resetting the line configuration will
not affect any mailbox or call routing administration attributes. Resetting the line
configuration can take up to five minutes. During this time, the CLASSIC MAIL
system will not answer incoming calls.
Chapter 9: Other Administration Items
97