Installation guide

For restricted voice terminals, if there is a check mark in one or more of the
“Allowed List Assigned” columns, do the following:
1
2
3
4
5
6
Enter administration mode.
The red lights go on next to Administer and Restrict.
Dial a * and a two-digit code (01 through 08) that corresponds to the list you
checked off to assign to the voice terminal.
Dial 00.
The green light goes on next to the Auto Intercom button for each voice terminal that has been
assigned this list.
Perform one of the following procedures:
>
Touch the Auto Intercom button for the voice terminal that you want to
assign the list.
>
Use the appropriate code from the Dial Code chart earlier in this section
under the heading “Using the BIS-22 Voice Terminal as an Administrator
Console” for the voice terminal to which the allowed list is to be
assigned.
Touch Administer.
The console beeps twice.
Continue to administer the system, or leave administration mode.
Systemwide Options 3-35