Installation guide

MUSIC-ON-HOLD
If you specified another duration (0, or 2 through 9) follow this procedure:
1 Enter administration mode.
The red lights go on next to Administer and Restrict.
2
Dial *83.
3 Dial one digit from 0 to 9 for the number of minutes.
4 Touch Administer.
The console beeps twice.
5
Continue to administer the system, or leave administration mode.
If you have an optional audio source and want to control the volume through
system administration, locate the column headed “Music-on-Hold” on the
System Configuration Form, then dial the appropriate code given in the
procedure below:
1 Enter administration mode.
The red lights go on next to Administer and Restrict.
2
Dial one of the following codes to set the volume you prefer:
> Dial *12 to turn off Music-on-Hold.
> Dial *13 to set the volume to low.
> Dial *14 to set the volume to medium.
> Dial *15 to set the volume to high.
3 Touch Administer.
The console beeps twice.
4
Continue to administer the system, or leave administration mode.
BACKGROUND MUSIC
If you have an optional audio source connected to the Music-on-Hold jack and
an optional loudspeaker paging system, you can regulate the volume of
background music with a dial code in system administration. Locate the column
headed “Background Music” on the System Configuration Form, then dial the
appropriate code given in the procedure below:
1 Enter administration mode.
The red lights go on next to Administer and Restrict.
2
Dial one of the following codes to set the volume you prefer:
> Dial *16 to turn off the background music.
> Dial *17 to set the volume to low.
> Dial *18 to set the volume to medium.
> Dial *19 to set the volume to high.
3 Touch Administer.
The console beeps twice.
4
Continue to administer the system, or leave administration mode.
Basic Administration 3-13