Installation guide

Administration procedures for CO line connection:
1 Slide the T/P switch to P and touch Administer.
2 Dial *91
3 Touch the button for the line you want to be the paging port.
Green light on
= line added to paging port
Green light off =
line removed from paging port
4
Touch Administer.
The console beeps twice.
5
Leave administration mode by sliding the T/P switch to the center position.
PROGRAMMING
Refer to “Loudspeaker Page” earlier in this section.
HOW TO USE
Using the Loudspeaker Paging System connected to the Page Jack:
To use the Loudspeaker Page button:
1 Touch Loudspeaker Page.
2 When you hear the beep, lift your handset and make your announcement.
To use this feature dialing a code:
1 Touch Intercom.
2 Lift your handset.
3 Dial 6.
4 When you hear the beep, make your announcement.
The loudspeaker will turn off automatically when you hang up.
Using the Loudspeaker Paging System connected to a CO Iine:
1 Touch the loudspeaker page’s line button.
2 Follow the instructions provided with your loudspeaker page system.
3 If your loudspeaker page system provides a warning tone (beep), wait for the
tone before making your announcement.
6-20 Accessory Equipment